Easy In Action
(a few samples)

HGV cooling system:

• Operating temperature range -25 °C to +55 °C of all the easy devices enables them to be used directly in outdoor installations, on vehicles, etc.
• easy is particularly cost efficient: it can do without the keypad and display window and then costs less. Here an LED signals the operating status. The easy circuit diagrams are used in all easy devices, whether or not they have a display window.
• Temperature, pressure, etc. can be recorded via analog inputs.
• Devices mounted by fitting onto top-hat rail, or by screw fixing using the mounting brackets.

Lighting for shop windows:

• Automatic daylight- and clock-controlled switching of lighting and external advertising shows products in a “favorable light”.
• Lighting can be activated in the event of an alarm or at random.
• Program protection via password.
• Supply and input voltage 100 to 240 V AC. Direct switching of the load current via relay. Direct connection of, for example, standard recessed switches to easy.

Machine control:

• Plug-in memory module enables duplication of easy circuit diagram without a PC. Any subsequent changes to the circuit diagram which may be necessary, can be undertaken off-site, the memory module sent to site and the modifications read into the easy there.
• Adjustable start-up behavior (RUN or STOP), which then governs the operating mode when the power is switched on, facilitates commissioning.
• Detection of short circuits and selective disconnection of the transistor outputs in the event of short circuit or overload.

Lighting control for buildings:

• Both centralized and decentralized impulse-relay function switching of lights is possible.
• A real-time controlled Off pulse enables central disconnection of the lighting for power saving purposes.
• A basic unit can control up to 12 separate groups of lighting. Convenience lighting control such as that of a central light for cleaning, semi-lighting in the stair well or a pulse for pre-warning of a dark phase can be configured.
• Suitable for fitting in low-voltage distribution boards due to 45 mm standard front dimension, and either 4, 6, 8 or 12 times MCB width.